Edit+ Installation Guide

This guide will help you install Edit+ on your Squiz Matrix System.

This guide is current for Squiz Matrix version 5.4


Install Guides for Older Versions

The table below contains links to installation guides for previous versions of Easy Edit Suite/Edit+.

EES/Edit+ Versions Squiz Matrix Compatibility Archived Install Guides
435 to 833 3.28.0 to 3.28.9 Install Guide for EES Phase 1 and 2 (PDF)
1081 to 1141-3 4.4.1 to 4.8.1 Install Guide for EES Phase 3 (PDF)
1645 to 1.5.0 4.6.6 to 4.18.9 Install Guide for EES Phase 4 (PDF)
5.0 to 5.1 5.0 to 5.1 Install Guide for Matrix 5.0 - 5.1
5.2 to 5.35.2 to 5.3Install Guide for Matrix 5.2 - 5.3

Extracting the Edit+ Files onto the Server

This guide assumes that you have installed Squiz Matrix into /var/www/ - please make adjustments to commands as required. It also assumes you have downloaded and placed a copy of the Edit+ package into the /var/www/matrix/data/public directory on your server.

Running the following commands will navigate you to the correct directory and unpack Edit+ into the matrix/data/public folder. The downloaded file will contain a version number, so be sure to replace [version] with the current version number in the commands below.

$ cd /var/www/matrix/data/public
$ tar -zxf edit-plus-[version].tar.gz
$ rm edit-plus-[version].tar.gz

After running these commands, you should have a new directory called /ees.

Configuring the Edit+ Manager

The Edit+ Manager can be found in the System Management folder on the root level of the Matrix install. It allows you to configure various option for Edit+. For more information please view the Edit+ Manager guide.

View the Details screen of the Edit+ Manager. If you have successfully installed Edit+, you will see the version listed in the Edit+ Status field. If the field says "Not Installed", make sure you have followed the steps above to install the Edit+ package correctly.

Take note of the of the Edit+ Configuration code. It will be populated by default with the configuration options needed for Edit+ to function. You can find more configuration options in the Edit+ Manager guide.

You can restore the Edit+ Configuration code to the default values at anytime by enabling the Restore Configuration To Default option and saving the screen.

In the Restrictions section, the Root Nodes option will be initially be set to the Root Folder of Matrix (Asset ID #1). This will allow Edit+ to be available for all assets within the system. You can change this option to restrict the availability to one or more assets within Matrix, allowing you granular control over which sites can be edited via Edit+.

Adding Edit+ to Your Design's Parse File

To use Edit+ on a Site, the Parse File of the Site's Design must be edited.

To do this:

  1. Right click on the Design and select Edit Parse File.
  2. At the very top of the parse file, before any other code, add the following:
    <mysource_area id_name="editplus" design_area="editplus"/>
  3. Click Save.

When you access /_edit on a URL of your site the Edit+ interface will now load instead of the default Simple Edit interface.

Customising Global Edit+ Configurations

Sometimes you might want to customise the settings of your global Edit+ config that are sourced from the Edit+ Manager for a particular site. The best way to do this is to nest in some additional code into the Edit+ Design Area that lets you overwrite any of these global settings.

To do this:

  1. Create a new Standard Page called Edit+ Config and make it Live.
  2. On the Edit Contents screen, edit the properties of the Content Container and change the Presentation setting to Raw (no formatting) and the Content Type setting to Raw HTML.
  3. In this Raw HTML Container, you can add your custom Edit+ configuration. For example, the code is customising the Asset Finder Locations and Google Analytics View ID configuration options, which will overwrite the global values set by the Edit+ Manager asset's config:
  4. <!-- Custom Edit+ Config  -->
    EasyEditConfig.assetFinderLocations =  [7219, 7397, 8737];
    EasyEditConfig.analyticsViewId =       1234;
  5. Now we need to include this code into our Design. Edit the Design Parse File again and locate your editplus Design Area.
  6. Add a new Nested Design Area before the editplus code and then use the Print Design Tag to print the nested content inside the editplus tag, like this:
    <mysource_area id_name="editplus_custom" design_area="nest_content" print="no" />
    <mysource_area id_name="editplus" design_area="editplus">
        <mysource_print id_name="editplus_custom" />
  7. On the Details screen of the base level (direct children) Customisation(s) of your Site's Design, customise the editplus_custom Design Area.
  8. On the Details screen of the customised design area, select the Edit+ Config Standard Page asset in the Nested Asset field.

    The Print setting on the editplus_custom Design Area should be set to No.

Removing Edit+ From a Design

To remove Edit+ from a Design:

  1. Acquire the lock(s) on the Edit Parse File screen of the Design file.
  2. Remove the whole Edit Plus Design Area from the top of the parse file and click Save. This will remove references to Edit+ in the parse file of the Design.

Edit+ will now be removed from your Design.

The Latest


Date Version
17 Apr 20195.5.2.2
22 Mar 20195.5.2.1
12 Mar 20195.5.2.0
12 Mar 20195.5.1.7
06 Mar 20195.5.1.6
07 Feb 20195.5.1.5
06 Feb 20195.5.1.4
21 Jan 20195.5.1.3

Let Us Know What You Think

Let us know if you spot any errors or if you have any ideas on how we can improve the Matrix Community Website.

Contact Squiz for Demo

Let us show you the true power of Squiz Matrix by giving you a personalised demonstration.